EN-12
CAUTION
Do not apply excessive pressure when scrubbing
the Back Panel.
NOTE
How to clean hard to remove dirt.
1. Add a small amount of kitchen
detergent to water and soak for
about 10 minutes.
2. Rinse off the kitchen detergent
with clean water.
3. Completely dry the filter in a
wellventilated area.
WATER TANK
MAIN BODY / BACK
PANEL
CARE INDEX
FILTER
MAINTENANCE LAMP
CARE AND MAINTENANCE
3
6
2
4
2
Place Page
1
Water Tank 12
2
Main Body / Back Panel 12
3
Sensors 14
4
Humidifying Filter / Humidifying Tray 13
5
HEPA Filter / Deodorizing Filter 14
6
Plasmacluster Ion Generating Unit 14
How to clean hard to remove dirt.
Tank Cap Toothbrush
Rinse the inside
with water.
Wipe with a dry,
soft cloth.
Remove the
dust gently
with a cleaning
tool such as a
vacuum cleaner.
NOTE
Back Panel
(Pre-Filter)
When the cumulative operation period or the water
containing period is more than approximately 720
hours, the Filter Maintenance Lamp will turn on.
• It will not calculate the time when the product is
unplugged.
• 30 days × 24 hours = 720 hours
This is a reminder to perform the maintenance
described Humidifying Filter and Tray, Main Body,
Back Panel, and Sensors.
After performing maintenance, reset the Filter
Maintenance Lamp.
RESET
Touch for
3 sec.
Back Panel
Clean the inside of
the Water Tank with
a soft sponge and
the Tank Cap with
a cotton swab or
toothbrush.
Always be sure to remove the
power plug from the wall outlet.
KI-L60TA_EN.indd 12 2020/08/28 15:47:54
To Next Page
Loading...
