LC-22DC30M
5 – 5
6. Factory setting
AC power is plug off after shipment setting is done.
CAUTION: Do not plug on again after shipment setting is done. If do, please re-do the shipment setting. Do not off with remote control.
Adjustment item Adjustment condition Adjustment procedure
Factory setting AC power off to exit the fac-
tory setting.
[Factory setting with adjustment process mode]
1) Enter the adjustment process mode.
2) Move the cursor to [Factory init] on page 2/10.
3) Press “ENTER” to execute
4) After a while,"OK" display appears and background colour is green, the setting is
completed.
The followings are initialized to factory setting
1) User setting
2) Channel data (e. g. broadcast frequencies)
3) Manufacturer’s option settings
4) Password data
5) Setting values are set based on model destination
To Next Page
Loading...
Need help?
General
