Sharp LC-22LE240E User Manual

31
LC-22LE240
5. MICROCONTROLLER – MSTAR(U5)
5.1. Description
MSD9WB9PT-2 (Main IC) (U5)
The MSD9WB9PT-2 is MStar’s most up-to-date system-on-chip solution for flat panel
integrated digital television products. Building on the success of MStar’s preceding SOC
series, the MSD9WB9PT-2 provides most cost-effective solution for DTV application with
creative and attractive features exclusively presented by MStar.
The MSD9WB9PT-2 integrates DTV/multi-media all-purpose AV decoder, DVB-T
demodulator, VIF demodulator, and Sound/Video processor into a single device. This
allows the overall BOM to be reduced significantly making the MSD9WB9PT-2 a very
competitive multi-media DTV solution. For ATV users, the MSD9WB9PT-2 provides multi-
standard analog TV support with adaptive 3D video decoding and VBI data extraction.
The build-in audio decoder is capable of decoding FM, AM, NICAM, A2, BTSC and EIA-J
sound standards. The MSD9WB9PT-2 supplies all the necessary A/V inputs and outputs
to complete a receiver design including a multi-port HDMI receiver and component video
ADC. All input selection multiplexed for video and audio are integrated, including full
SCART support with CVBS output. The equipped MStar MACE-5 color engine is the
latest masterpiece from
MStar famous color engine series providing excellent video and picture quality in Full-HD
and large-scale displaying system.
To meet the increasingly popular energy legislative requirements without the use of
additional hardware, the MSD9WB9PT-2 has an ultra low power standby mode during
which an embedded MCU can act upon standby events and wake up the system as
required.
The MSD9WB9PT-2 is composed of several modules:
High Performance Micro-processor
 Ultra high speed/performance 32-bit RISC CPU
 One full duplex UARTs
 Supports USB and ISP programming
 DMA Engine
Transport Stream De-multiplexer
 Supports parallel and serial TS interface, with or without sync signal
 Supports TS input and output for external CI module
 Maximum TS data rate is 104 Mb/sec for serial or 16 MB/sec for parallel
 32 general purpose PID filters and section filters for each transport stream de-
multiplexer
 Supports additional audio/video/PCR filters
 Supports TS DMA channel for time-shift
 Supports 3DES/DES and AES encryption/decryption
MPEG-2 Video Decoder
 ISO/IEC 13818-2 MPEG-2 video MP@HL
 Automatic frame rate conversion
 Supports resolution up to HDTV (1080i, 720p) and SDTV

Sharp LC-22LE240E Specifications

General

Screen shape	Flat
Response time	8 ms
Display diagonal	22 \
Display brightness	250 cd/m²
LED backlighting type	Edge-LED
Supported video modes	1080p
Contrast ratio (dynamic)	-
Display diagonal (metric)	55 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Annual energy consumption	32 kWh
Product color	Black
Panel mounting interface	75 x 75 mm
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-T
RMS rated power	5 W
Number of speakers	2
HDMI version	1.3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Video formats supported	DIVX, H.264, MPEG2, MPEG4
Remote control type	RC1910
Power consumption (standby)	0.5 W

Weight and Dimensions

Depth (with stand)	135 mm
Height (with stand)	379 mm
Weight (with stand)	5000 g
Depth (without stand)	36 mm
Width (without stand)	535 mm
Height (without stand)	347 mm
Weight (without stand)	- g