EasyManuals Logo

Sharp LC-22LE240E User Manual

Sharp LC-22LE240E
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
56
LC-22LE240
SOFTWARE UPDATE
20. SOFTWARE UPDATE
In MB62 project there is only one software. From following steps software update
procedure can be seen:
1. MB62_en.bin, mboot.bin and usb_auto_update_T4.txt documents should copy directly
inside of a flash memory(not in a folder).
2. Put flash memory to the tv when tv is powered off.
3. Power on the and wait when the tv is opened.
4. If First Time Installition screen comes, it means software update procedure is
succesful.
19.7. USB Operations
USB operations option can not be used directly. It can be used for updating panel tool, hw
congiguration etc.
1. MB62 en. bin, mboot.bin and usb_auto_update_mb62.txt documents should copy directly
inside of ash memory ( not in a folder).
2. Put ash memory to the TV when TV is powered off.
3. Power on the TV by main switch and press OK in remote control continuously during 3 -4
seconds. Then led will start blinking (red / green) quickly.
4. If First Time installation screen comes, it means software update procedure is successful.

Table of Contents

Other manuals for Sharp LC-22LE240E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-22LE240E and is the answer not in the manual?

Sharp LC-22LE240E Specifications

General IconGeneral
Screen shapeFlat
Response time8 ms
Display diagonal22 \
Display brightness250 cd/m²
LED backlighting typeEdge-LED
Supported video modes1080p
Contrast ratio (dynamic)-
Display diagonal (metric)55 cm
Supported graphics resolutions1920 x 1080 (HD 1080)
3DNo
Annual energy consumption32 kWh
Product colorBlack
Panel mounting interface75 x 75 mm
Analog signal format systemNTSC, PAL, SECAM
Digital signal format systemDVB-C, DVB-T
RMS rated power5 W
Number of speakers2
HDMI version1.3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
Video formats supportedDIVX, H.264, MPEG2, MPEG4
Remote control typeRC1910
Power consumption (standby)0.5 W
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)135 mm
Height (with stand)379 mm
Weight (with stand)5000 g
Depth (without stand)36 mm
Width (without stand)535 mm
Height (without stand)347 mm
Weight (without stand)- g

Related product manuals