Sharp LC-32HT1U - Operation Manual

7
LC-32HT1U
Operation Manual
Part names
POWER indicatorOPC sensor
TV (Front)
POWER button
INPUT button
Volume buttons (VOL
Ð/+
)
Channel buttons (CH )
Remote control sensor
*OPC: Optical Picture Control
(See the OPERATION MANUAL FOR HOTEL OPERATOR.)
OPC indicator*
NOTE
• See the OPERATION MANUAL for status indicator.
Part names
TV (Rear)
*
1
Press RESET if the TV cannot return to its original state after performing various operations. • AV MODE resets to DYNAMIC (Fixed) • TV channel returns to the default channel in the PPV TV mode and to initial channel (Air: 2ch, Cable: 1 or 2ch) in the
Normal TV mode.
• Audio setting initializes • Surround resets to off •Image position initializes
*
2
Press SYSTEM RESET if the TV does not operate after starting up.
*
3
The MONITOR OUTPUT terminal is not available in the PPV TV mode.
*
4
The TRANSPORT terminal is designed for hotel communication. Do not use it for other purposes.
NOTE
•Pressing RESET will not work if the TV is in standby mode. •Pressing RESET will not delete channel preset or secret number. See the OPERATION MANUAL FOR HOTEL OPERATOR
to clear the secret number when you know it. See the OPERATION MANUAL FOR HOTEL OPERATOR to initialize the TV settings to the factory preset values when you forget your secret number.
RESET*
1
INPUT 3
terminals
SYSTEM RESET*
2
ANALOG IN terminal
AC INPUT terminal
RS-232C terminal
INPUT 2 terminals
INPUT 1
terminals
INPUT 4 terminals
MONITOR OUTPUT terminals*
3
TRANSPORT terminal*
4
DIGITAL AIR IN terminal
DIGITAL AUDIO
OUTPUT terminal