8
LC-32HT1U
Part names
Remote control unit
(Optional accessory)
1 TV POWER: Switch the TV power on or standby.
2 DISPLAY: Display the channel information.
3 SOURCE POWER: Turn the power of the external
equipment on and off.
4 External equipment operational buttons: Operate the
external equipment.
50 – 9: Set the channel.
6 (DOT)
7 INPUT: Select a TV input source. (TV, INPUT 1, INPUT
2, INPUT 3, INPUT 4)
8 VOL
+/Ð
: Set the volume.
9 SURROUND: Select Surround settings.
10 FREEZE: Set the still image. Press again to return to
normal screen.
11 EXIT: Turn off the menu screen.
12 SLEEP: Set the sleep timer.
13 AUDIO: Selects the MTS/SAP or the audio mode during
multi-channel audio broadcasts.
14 FUNCTION: Switches the remote control for TV, CBL/
SAT, VCR, DVD and AUDIO operation. Indicator lights
up for the current mode.
* To enter the code registration mode, you need to press
FUNCTION and DISPLAY at the same time.
15 LIGHT
: When pressed all buttons on the remote
control unit will light. The lighting will turn off if no
operations are performed within about 5 seconds. This
button is used for performing operations in low-light
situations.
16 VIEW MODE: Select the screen size.
17 ENT: Enters a channel selection when choosing with
the 0 – 9 buttons.
18 FLASHBACK: Return to the previous channel or input
external mode.
19 CH : Select the channel.
20 MUTE: Mute the sound.
21 MENU: Display the menu screen.
22 ENTER: Select a desired item on the screen.
23 RETURN: Return to the previous menu screen.
24 FAVORITE CH
A, B, C, D: Select four preset favorite channels in four
different categories.
While watching, you can toggle the selected channels
by pressing A, B, C and D.
25 FAVORITE: Register favorite channel.
26 CC: Display captions during closed-caption source.
27 AV MODE: Select an audio or video setting.
(STANDARD, MOVIE, GAME, USER, DYNAMIC
(Fixed), DYNAMIC.)
NOTE
When using the remote control unit, point it at the TV.
See the OPERATION MANUAL FOR HOTEL OPERATOR
for details on the functions of each button.
3
2
114
5
6
4
8
17
15
16
18
19
7
20
10
9
21
11 23
24
25
12
13 27
22
26
Part names
CLONE DEVICE (Optional accessory)
1 LEARN indicator: Lights up while storing the TV
settings from the TV to the CLONE DEVICE.
2 DONE indicator: Lights up when storing or transferring
is finished.
3 TEACH indicator: Lights up while transferring the TV
settings from the CLONE DEVICE to the TV.
4 MEMORY SELECT indicator: Indicates which memory
bank is selected.
5 LEARN button: Store the TV settings from the TV to the
CLONE DEVICE.
6 TEACH button: Transfer the TV settings from the CLONE
DEVICE to the TV.
7ROOM button: The TV turns off and enters the ROOM
mode when the TV is in the MASTER mode. You can
turn on or off the TV when the TV is in the ROOM mode.
8 MASTER button: The TV is turned on and enters the
MASTER mode when the TV is turned off. The menu
screen displays when the TV is turned on in the MASTER
mode or the ROOM mode. The TV is turned off and
enters the PPV TV mode when the TV is in the Normal
TV mode.
9 DIAGNOSTICS button: Perform operational tests.
10 MEMORY SELECT button: Select the memory bank to
store or transfer data.
11 TRANSPORT (RJ-11) connector: Connect to the TV
when storing or transferring the data.
NOTE
• When using the CLONE DEVICE, point it at the TV.
• See the OPERATION MANUAL FOR HOTEL OPERATOR
for details on the functions of each button.
• You cannot use IR (infra-red) devices to send signals when
the TRANSPORT (RJ-11) connector is connected to the
TRANSPORT terminal of the TV via an RJ-11 cable.
• The TRANSPORT (RJ-11) connector is designed for hotel
communication. Do not use it for other purposes.
2
1
5
6
7
8
9
10
3
4
11
The CLONE DEVICE is only for hotel operators.
'"\ |
To Next Page
Loading...
