Sharp LC-32LE265T - STEP 2: Connect SCL, SDA, and GND between PC and panel module; STEP 3: Send the correct flicker pattern

LC-32LE265T / LC-40LE265T
3 – 4
STEP 2: Connect SCL, SDA, and GND between PC and panel module
VGA
LVDS(I/F)
PC A/D Board PCBI
DVI
LVDS(I/F)
Sensor board
USB
7 PINS
STEP 3: Send the correct flicker pattern (refer to CMI product SPEC)