5 - 12
LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
[8.4] Using Error Count
[8.5] Using LCD Size
Item # Item Adjustment Conditions Adjustment Procedure
926 Error Count None. 1. Enter the adjustment process mode.
2. Go to this item. The number displayed is the number of
times the TV went into reset due to an error.
Item # Item Adjustment Conditions Adjustment Procedure
927 LCD Size This setting must be set after
replacing the mainboard to make
sure the right settings are loaded
for the TV (gamma table, etc.)
1. Enter the adjustment process mode.
2. Go to this item. Press
X to set the size of the panel:
1 = LC-32WD1E, LC-32WT1E
2 = LC-32WD1S
3 = LC-32WD1RU
4 = LC-37WD1E, LC-37WT1E
5 = LC-37WD1S
6 = LC-37WD1RU
7 = LC-42WD1E, LC-42WT1E
8 = LC-42WD1S
9 = LC-42WD1RU
To Next Page
Loading...
