LC-37XD1E/RU
3 – 11
4. Tuner adjustment
1 Setting [Signal]
PAL
PAL sprit colour bar
䊶Feed the RF signal (PAL colour bar) to TUNER.
RF signal
䊶Make sure㵘the PAL colour bar pattern (E-12) has㩷the sync level of
㵘7:3 with the picture level.
[Terminal]
TUNER
㸡100% white
2
Auto adjustment Adjustment process Bring the cursor on [ TUNER ADJ] and press [OK].
performance Page3. [ TUNER ADJ OK] appears when finished.
Adjustment point Adjustment conditions
䈀E-12CH䈁
Adjustment procedure
To Next Page
