Sharp LC-40LE830E/RU - Removing of Major Parts (Lc-46 Le830 E, Ru;831 E, S)

LC-40/46LE830E, RU/831E, S
4 – 6
[2] REMOVING OF MAJOR PARTS (LC-46LE830E, RU/831E, S)
1. Removing of Stand Unit and Rear Cabinet Ass’y.
1. Remove the 1 lock screw and detach the Stand Support Cover .
2. Remove the 4 lock screws and detach the Stand Unit .
3. Remove the 1 lock screw and detach the AC Cord Cover .
4. Disconnect the AC wire and detach the AC Cord .
5. Remove the 4 Vesa Hole Covers , 7 lock screws , 2 lock screws and 12 lock screws and detach the Rear Cabinet Ass’y .
[AC]
[AC]
2Stand Support Cover
1
4 Stand Unit
3
8
6AC Cord Cover
5
AC Cord
7
9
11
Rear Cabinet Ass'y
12
11
10