Sharp LC-40LE830E/RU - Page 22

LC-40/46LE830E, RU/831E, S
4 – 9
4. Removing of Speaker (Woofer), 46” LCD Panel Module Unit, MAIN Unit, POWER Unit, LCD CONTROL Unit.
1. Detach the Speaker (Woofer) .
2. Detach the 9 LCD Fixing Angles .
3. Remove the 9 Hooks and detach the 46” LCD Panel Module Unit .
4. Remove the 5 lock screws and detach the Main Shield .
5. Remove the 2 lock screws and detach the MAIN Unit .
6. Remove the 1 lock nut and Terminal Angle (Bottom) and Earth Spring .
7. Remove the 6 lock screws and detach the POWER Unit and 2 Insulation Sheet .
8. Remove the 13 lock screws and detach the Center Angle-L , Center Angle-R .
9. Remove the 4 Connecting Cords , 4 Ferrite Cores and 6 lock screws and detach the LCD CONTROL Unit .
10.Remove the 2 lock screws and detach the Connector Cord with Eco Switch .
10
9
Terminal Angle
(Bottom)
13
Insulation Sheet
13
Insulation Sheet
8 MAIN Unit
2LCD Fixing Angle
2LCD Fixing Angle 2 LCD Fixing Angle
2
3
3
33
3
LCD Fixing Angle
46" LCD Panel
Module Unit
4
2LCD Fixing Angle
2 LCD Fixing Angle
2 LCD Fixing Angle
1Speaker
(Woofer)
[SB]
14 14
16 Center
Angle-R
15 Center
Angle-L
11
12
POWER Unit
6
Main Shield
5
7
Hook
Hook Hook
Hook
Hook
19
18
18
Ferrite Core
17
Connecting Cord
Ferrite
Core
20 LCD CONTROL Unit
21
Earth Spring
22
23
Connector Cord
with Eco Switch
[AS]