Sharp LC-48CFE4042E - Service Menu Operations; Introduction and Picture Settings

40
5. SERVICE MENU
MSD3463 Factory Menu Specication
How to Enter Factory Menu?
Press the RC buttons in this sequence: “Menu 1 1 4 7” to enter the factory menu.
Description:
6.1 INTRODUCTION
6.2 ADC ADJUST & WHITE BALANCE AUTO
ADJUST
6.3 PICTURE
6.4 SOUND
6.5 GENERAL SETTING
6.6 DEBUG
6.7 PANEL SETTING
6.8 EMC SETTING
6.9 SYSTEM INFO
6.10 SW UPDATE
5.1 INTRODUCTION
SHIPPING INIT: TV Initilization to set default
TV parameters. Designed for Shipment.
AGING MODE: TV aging mode switch.
ADC ADJUST: Change ADC parameters
PICTURE SETTING: Change Picture Setting
SOUND SETTING: Change Sound Setting
GENERAL SETTING: Some other settings
usualy used, and also for Debug.
PANNEL SETTING: Change panel paramters
like BitMap, ODD.EVEN and Etc.
EMC SETTING: Some settings may aect EMC.
SYSTEM INFO: Display system information.
BOARD INIT: Factory reset.
SW UPGRADE: Software update item.
Picture 1 Factory Settings