Sharp LC-52LE920UN User Manual

LC-52LE920UN/LC-60LE920UN
6) PANEL BUTTON
Selection Selection between “Respond” and “No respond” (loop provided)
Default Respond
Explanation All the operations by keys (except the power key) of the unit can be invalidated.
Limit in Setting
Exception e Adjustment process, inspection mode and hotel menu mode can be started irrespective of setting.
e All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
Remarks
7) MENU BUTTON
Selection Selection between “Respond” and “No respond” (loop provided)
Default Respond
Explanation In “No respond” setting, the menu operation by the menu key of the remote control and the menu key of the unit are invali-
dated.
Limit in Setting
Exception e Adjustment process, inspection mode and hotel menu mode can be started irrespective of setting.
e All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
Remarks
8) ON SCREEN DISPLAY
Selection Selection between “Yes”, “No” (loop provided)
Default Yes
Explanation e At the “No” setting, the following items are not displayed on screen: register, setting, adjustment menu, channel cail and vol-
ume bar.
On the wide-screen models, an input selection is immediately made because the menu is not displayed.
e At the “Limited” setting, some items cannot be displayed on screen.
On the Japan-destined models, the channel cail “Message” alone cannot be displayed. (This is because the channel call mes-
sage may be confused with a message being sent from the hotel.)
On the North America-destined models, the OSD works the same as at the “No” seiting.
Limit in Setting e Keys falling under any of the following items become invalid.
@ Appearance of screen changes and the sound changes.
@ Personal functions which are hard to restore.
Screen display, menu, OFF-timer, ON-timer, AV MODE, screen size switching, clock setting, treble emphasis, AUDIO ONLY,
sound changeover, LANGUAGE, CLOSED CAPTION
Others e Simple input switching is generated. Those which are restored soon after leaving as they are and may be requested for
change by customer are not prohibited.
Brightness sensor (BACKLIGHT) and PIC. FLIP
Exception e Such a caution which is displayed independently is displayed as it is.
Non-responding signal caution
Remarks e When CC has already been ON, CLOSED CAPTION is displayed.
9) INPUT MODE START
Selection Selection between “Normal”, “Air (k)", “INPUT 1/2/3”, “PC”, “HDMI 1/2/3/4/5”, “DVI” (loop provided)
Default Normal
Explanation In power-ON, the input source to be started or channel can be set.
(in standard mode, the operation follows the last memory.)
About options e All the input sources in the model are made selectable.
e In TV mode, the channel to be set follows the last memory and the content of the last memory is included in the notation by
options. Ex.) Air (2), Cable (98.1) etc.
Limit in Setting e The display of channel setting menu and the channel setting operation are prohibited.
Exception
Remarks e In setting at “Normal”, the setting of “Input mode fixed” is changed to “Variable” and selection should be prohibited.
5-18

Sharp LC-52LE920UN Specifications

General

Brand	Sharp
Model	LC-52LE920UN
Category	TV
Language	English