Sharp LC-52LE920UN User Manual

LC-52LE920UN/LC-60LE920UN
10)INPUT MODE FIXED
Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)’ (loop provided)
Default — (Variable)
Explanation e At the “Fixed” setting, the TV set gets started with the settings of “Input mode start’, and then any other channels and inputs
are not accepted.
e At the “ACON (AC CTRL)’ setting, the TV set gets started with the settings of “Input mode start” under AC control.
e At the “AC/RCON (AC/RC CTRL)’ setting, the TV set gets started with the settings of “Input mode start” under either control.
Limit in Setting e With the execution of hotel mode, the input source is forced to change to that set by “Input mode start” and the channel
switching and input switching are prohibited thereafter.
e ON-timer’s (Wake-up timer) channel items are not displayed or the operation is prohibited. (Basically, they are not displayed.)
e The following keys are invalidated.
CH A/Y, direct tuning button, FLASHBACK, input
* However, the keys (input switching and CH A/ W keys) of the unit for menu operation remain valid.
Exception None
Remarks e In the following case, setting is cancelled and mode is changed to “Variable”.
@ When the setting of “Input mode start” is set fo “Normal”.
11)RC_PATH_THROUGH
Selection Selection between “OFF”, “ON: TV RCE” and “ON: TV RCD” (loop provided)
Default OFF
Explanation Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.
Limit in Setting None
Exception None
Remarks None
12)AV POSITION FIXED
Selection Selection between “Variable” and “Fixed” (loop provided)
Default Variable
Explanation In case of “Fixed” setting,
— Menu “Picture” and “Audio” setting can't be changed like “Dynamic (Fixed)’.
— When “AV Mode” key is pressed, TV just displays current AV Mode (cannot be changed. ).
Limit in Setting None
Exception None
Remarks e When receiving with AV Position key, OPC, Dolby key and other direct audio select keys, the current display stays on and no
setting can be changed.
e Even by initializing personal information, the hotel-mode settings are kept intact. In this way, the AV positions, video and
audio adjustment settings are not initialized.
13)LOUD SPEAKER (ON/OFF)
Selection Selection between “ON” and “OFF” (loop provided)
Default ON
Explanation If “OFF” is selected, TV stops Speaker output even without Headphone connected.
Limit in Setting None
Exception None
Remarks e Press the volume UP/DOWN key, and the mute icon appears for 4 seconds.
e The mute key and audio-related keys are displayed with caution.
e Usually, the headphones and monitor audio outputs can be adjustable.
14)232C POWON
Selection Selection between “Disable” and “Enable” (loop provided)
Default Disable
Explanation In the standby mode, the power-on by the 232C command is enabled or disabled.
Limit in Setting None
Exception None
Remarks None
5-19

Sharp LC-52LE920UN Specifications

General

Brand	Sharp
Model	LC-52LE920UN
Category	TV
Language	English