Sharp LC-60UF30H - Turning the TV On;Off; Running the TV for the First Time; Turning off the TV

16
Preparation
Turning the TV on/off
POWER
button
POWER
button
NOTE
• IfyouarenotgoingtousethisTVforalongperiodoftime,
besuretoremovetheACcordfromtheACoutlet.
• Asmallamountofelectricpowerisstillconsumedeventhe
TVisinstandbymode.
• IfTVlosespowerinspecialcircumstances(suchaspower
outageorgriductuations,etc.),TVmaynotworkwell
whenTVisswitchedonagain.Pleasetrytopoweroffthe
TV(bythePOWERkeyontheTVorthePOWER on the
remotecontrol)orunplugandreplugtheACcordtorestart
theTV.
• ItisanormalphenomenonwhentheTVtemperaturerises
intheprocessofwatchingTV.
• Pleasedonotcutthepoweroffcasuallyintheprocess
ofswitchingonorswitchingofftheTV,runningAPPSor
updating,otherwiseTVsystemcouldnotworkrightly.
PleaseturnoffTVafterclosingallAPPS.
Running the TV for the first time
Turning off the TV
w Power indicator
AfterinsertingtheACcord,pressPOWERontheTV.
IftheTVisswitchedon,pressPOWER on the remote
control or the POWERontheTV:
• Thepowerindicatorturnsgreen.TVisswitchedon(After
severalseconds,animageappearswithsound.)
• YoucanswitchtheTVtostandbybypressingPOWER on
the remote control or the POWERontheTV.
• TVisswitchedintostandbyandtheimagedisappeared.
• Thepowerindicatorturnstoredfromgreen.Press
POWER on the remote control or the POWERontheTV
toturnontheTV.
• IfpullouttheACcordandthenplugit
,
the power indicator
turns to red. Press POWER on the remote control or the
POWERontheTVtoturniton.
Off Power off
Red
TVisinstandby
Green
TVisswitchedon