Sharp LC-60UF30H - The Added Instruction for R;C Buttons; A (Flashback); E (Mute); Mpx

e
(Mute)
Using
e
(Mute)ontheremotecontrolunit
to mute the
current sound output.
1
2
Press
e
(Mute)
.
• Thesoundissilenced.
• “
” is displayed while the mute function is on.
Press
e
(Mute)
again to cancel the mute, the
sound can return to the original setting.
24
Watching TV
NOTE
• ThetimedisplayedontheEPGisinformationsentbythe
TVstation.
The added instruction for R/C buttons
A
(Flashback)
Press
A
to switch the currently tuned channel or
externalinputsourcetothepreviouslytunedchannel
or external input source.
Signal Mode switch
When receiving a
stereo signal
NICAMSTEREO,MONO
When receiving a
bilingual signal
NICAMDUAL
Ⅰ
,NICAMDUAL
Ⅱ
,
NICAMDUAL
Ⅰ
+
Ⅱ
,MONO.
When receiving a
monaural signal
NICAMMONO,MONO
MPX
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
EachtimeyoupressMPX the mode switches as
follows.
In the NICAM TV broadcasts
In the TV mode of A2 TV broadcasts
Signal Mode switch
When receiving a
stereo signal
STEREO,MONO
When receiving a
bilingual signal
CHA,CHB,CHAB
When receiving a
monaural signal
MONO
GUIDE
EPG
DisplaythechannellistofDTV.
TheEPG(ElectronicProgrammeGuide)isbroadcasted
togetherwithDTV.TheTVscreenshowstheEPG
whentheviewerpressesEPG on the remote
control,providedthattheTVisreceivingthedigital
broadcastingsignal.TheEPGenablesyoutocheck
thescheduleofDTV,viewdetailedinformation.
Press GUIDE,andthendisplaythe“Channel
List”ofDTVonthescreen.
Press the EPG on the remote control to
displayEPGscreen.
Press
a
/
b
/
c
/
d
and ENTER to display
programme information.
1
1
3
Press
a
/
b
to select the desired channel , and
then press ENTER to switch to the selected
channel.
• Whenreceivedaencryptionprogramthatcannot
be played, it will display the
“
key
”
icon.
Press
a
/
b
to select the desired channel , and
press ENTER. The programme of the selected
channel displays.
2
2
Press
A
to switch the currently tuned channel
orexternalinputsourcetothepreviouslytuned
channel or external input source.
1
Press
A
again to switch back to the currently
tuned channel or external input source.
2
NOTE
• SelectthesoundmultiplexforATVonly.