Sharp LC-M3700 User Manual

55
US
Settings and
Adjustments
Auto Sync.: Start Now
Function If “Yes” is selected and the ENTER button is pressed when applicable video is input,
the system automatically optimizes position, phase and clock using the video signal
which is currently being input.
Adjustable range Yes/No (“No” is always the default value)
Position: H-pos. (Video/S-video/INPUT 3 COMPONENT)
Adjustable range –10 - +10
Default 0
+ direction Image shifts right.
– direction Image shifts left.
Position: V-pos. (Video/S-video/INPUT 3 COMPONENT)
Adjustable range –20 - +20
Default 0
+ direction Image shifts up.
– direction Image shifts down.
Fine Sync.: H-pos. (INPUT3 (RGB)/(PC (analog))
Adjustable range 0 - 180
Default 0
+ direction Image shifts right.
– direction Image shifts left.
Note: No position adjustment is available when PC (digital) signal is received.
Fine Sync.: V-pos. (INPUT3 (RGB) /(PC (analog))
Adjustable range 0 - 99
Default (Varies depending on video frequency)
+ direction Image shifts up.
– direction Image shifts down.
Note: No position adjustment is available when PC (digital) signal is received.
Fine Sync.: Clock (INPUT3 (RGB) /(PC (analog))
Function Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of vertical stripes.
Adjustable range 0 - 180
Default 90
+ direction Clock frequency increases
– direction Clock frequency decreases
Note: No clock frequency adjustment is available when PC (digital) signal is received.
Fine Sync.: Phase (INPUT3 (RGB) /(PC (analog))
Function Adjusts phase of sampling clock for applicable video.
Useful when small characters appear with low contrast and/or there are flickers at
corners.
Adjustable range 0 - 40
Default 20
+ direction Advances clock phase
– direction Delays clock phase
Note: There is no clock phase adjustment for PC (digital) signals.
Settings and Adjustments (Continued)

Sharp LC-M3700 Specifications

General

Brand	Sharp
Model	LC-M3700
Category	Monitor
Language	English