Using a PC
Control of the TV (Continue)
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
AV MODE SELECTION A V M D * * * _ 0: (Toggle),
1: STANDARD
(ENERGY
STAR)*1,
2: MOVIE,
3: GAME,
4: USER,
5: DYNAMIC
(Fixed),
6: DYNAMIC,
7: PC,
8: x.v.Color,
13: VINTAGE
MOVIE,
14: STANDARD
(3D)/3D,
15: MOVIE (3D),
16: GAME (3D),
17: MOVIE THX,
100: AUTO
Although it can
choose now, it
is toggle
operation in
inside.
8, 13: For the
UQ17U,
TQ15U,
SQ17U,
SQ15U, SQ10U
and EQ10U
models.
14, 16: For the
UQ17U,
TQ15U,
SQ17U,
SQ15U,
LE657U and
UD1U models.
15: For the
LE657U model.
17: For the
UQ17U and
UD1U models.
100: Except for
UD1U
VOLUME V O L M * * *_ _ Volume (0-100)
POSITION H-
POSITION
H P O S * * * _ The screen
position variable
ranges depend
on the View
Mode or the
signal type.
V-
POSITION
V P O S * * * _
CLOCK C L C K * * * _ Only PC mode.
(0-180)
PHASE P H S E * * _ _ Only PC mode.
(0-40)
*1: Except for LE657U and UD1U
CONTROL
ITEM
COMMAND PARAMETER CONTROL CONTENTS
VIEW MODE W I D E * * _ _ 0: (Toggle) [AV],
1: Side Bar [AV],
2: S.Stretch [AV]
3: Zoom [AV],
4: Stretch [AV, USB-
Video, Home
Network Video or
Internet
applications],
5: Normal [PC]
6: Zoom [PC],
7: Stretch [PC],
8: Dot by Dot [PC]
[AV],
9: Full Screen [AV]
10: Auto [USB-
Video, USB-Photo,
SD-Video, SD-
Photo, Home
Network Video,
Photo or Internet
applications],
11: Original [USB-
Video, USB-Photo,
SD-Video, SD-
Photo, Home
Network Video,
Photo or Internet
applications]
0: Although it can
choose now, it is
toggle operation
in inside.
1: Only available
when 4:3 signal is
being input.
5, 6: Only
available when
4:3 signal is
being input.
8: [PC] Available
except when
UXGA is being
input.
[AV] Only
available when
1080i/p is being
input.
9: Only available
when 720p is
being input.
10, 11: Available
when USB-Video,
USB-Photo, SD-
Video, SD-Photo,
Home Network
Video, Photo or
Internet
application is
used.
10, 11: SD-Video,
SD-Photo is
available only for
the UD1U model.
MUTE M U T E * _ _ _ 0: (Toggle),
1: On,
2: Off
NOTE
If an underbar (_) appears in the parameter column, enter a space.
If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL
CONTENTS.
Any numerical value can replace the "x" on the table.
ENG 8-5
To Next Page
Loading...
