Sharp MD-MS722H

(1) Analogue recording
Connect the unit to equipment that has a
line output socket, using the analogue
cable included with this unit.
● Main equipment: CD player, MD player,
radio cassette player, etc.
● Cable required: Analogue cable in-
cluded with this unit
(2) Digital recording
Connect the unit to equipment that has an
optical output socket using the optical dig-
ital cable included with this unit. Using an
optical signal to transfer the music to a
MiniDisc allows very high quality record-
ing.
● Main equipment: CS/BS tuner, CD
player, MD player, etc.
● Cable required: Optical digital cable
(Optical digital cable included with the
unit or optional optical digital cable AD-
M2DC)
BEFORE RECORDING
DIGITAL OUT
OPTICAL OUT
OPTICAL/
LINE IN
Optical digital cable
(AD-M2DC, available
separately)
Optical digital
cable
(supplied)
To the
OPTICAL/
LINE IN
socket
Recording side
Playback side
To the optical output
socket (square shaped
socket) on a stereo etc.
Playback side
To the optical output socket
(round shaped socket) on
an MD player etc.
RL
OPTICAL/
LINE IN
RIGHT LEFT
To the
OPTICAL/LINE
IN socket
Analogue cable included with this unit
To the line output
sockets on a stereo
AUDIO OUT
Playback side
Recording side
■ Type of recording
Two types of recording are possible: “Digital recording” and “Analogue recording”. There
are different cables and connections for each type of recording, depending on the sockets
on the equipment being connected to the unit.
9
MD-MS722H(SUK)