Sharp MD-MS722H

■ Rechargeable battery power
When the rechargeable battery is used for
the first time or when you want to use it
after a long period of disuse, be sure to
charge it fully.
1 Open the rechargeable battery com-
partment cover.
2 Insert the rechargeable battery.
● Insert the side with the arrow first.
3 Close the rechargeable battery com-
partment cover.
4 Plug the AC adaptor into the AC
socket, and then insert the plug on the
AC adaptor lead into the DC IN 5V
socket.
● About 4 seconds later, " " will flash,
and the battery will begin charging.
● Battery charging will be complete in 3.0
hours. When the charging is com-
plete, “ ” will go out.
POWER SOURCE
Notes:
● After charging has been completed, the
AC adaptor may be left connected.
(For example, when charging at night)
● If the rechargeable battery is in the unit,
it will be charged, even whilst operating
the unit. (Float charge)
● Do not force open the rechargeable
battery cover too wide.
● When the AC adaptor plug is inserted
and a MiniDisc has already been in-
serted, playback may start automati-
cally.
In this case, press the ■ / :OFF button
twice to turn the power off.
This unit can be used with 4 different power sources: a rechargeable battery, an AC
adaptor, a battery case, and a separately available car adaptor (AD-CA20X).
OPEN
OPEN
OPEN
1
OPEN
2
Mark
DC IN
5V
To the DC
IN 5V
socket
Insert
securely,
all the
way in.
AC 230-240V, 50/60 Hz
4
7
MD-MS722H(SUK)