Sharp MD-MS722H

■ APSS
(Auto Program Search System)
APSS automatically locates the beginning
of any track.
To move to the beginning of the
next track:
Move the shuttle switch up once during
playback.
To re-start the track being played:
Move the shuttle switch down once during
playback.
To skip a number of tracks at one time,
move the shuttle switch up or down re-
peatedly until the desired track number is
shown.
To begin playback at a desired track, move
the shuttle switch up or down repeatedly
whilst in the stop mode to select the track
number. Then, press the 06 button.
Note:
● If the first track on the disc is currently
selected and the shuttle switch is
moved down, the last track on the disc
will be located. When the last track is
currently selected and the shuttle
switch is moved up, the first track will
be located.
■ Cue and review
1 Load a MiniDisc and begin playback.
2 Move the shuttle switch up and hold it
there for audible fast forward. Or, move
the shuttle switch down and hold it
there for audible fast reverse.
3 Normal playback will resume when the
shuttle switch is released.
Notes:
● When the end of the last track is
reached during fast forward, the unit
will enter the pause mode. When the
beginning of the first track is reached
during fast reverse, the unit will enter
the playback mode.
● When the unit is in the all track repeat
mode, the search will wrap around from
the last track to the first, or vice versa.
● Depending on the contents recorded
on a MiniDisc, some sounds may be
skipped whilst cueing and reviewing.
To search very quickly:
When fast forward or fast reverse is used
whilst in the pause mode, the search will
be performed more quickly than during au-
dible fast forward or fast reverse playback.
● In this mode, no sound is heard. There-
fore, you should refer to the time dis-
play.
● When you lift your finger, the unit will
re-enter the pause mode.
CONVENIENT PLAYBACK FUNCTIONS
24
MD-MS722H(SUK)