Sharp MD-MS722H

MAINTENANCE
As a part of our policy of continuous improvement, SHARP reserves the right to
make design and specification changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
■ General
Power source: DC 3.6V (rechargeable lithium-ion battery x 1)
DC 5V (AC adaptor)
AC 230 - 240V, 50/60 Hz
DC 3.4V: Battery case
(commercially available, “AA” size, alkaline
battery x 1)
DC 4.5V: Separately available car adaptor, AD-CA20X
(for cars with a 12-24V DC negative earth
electrical system)
Power consumption: 7 W (AC adaptor)
Output power: RMS; 20 mW (10 mW + 10 mW)
(0.2% T.H.D.)
Charging time: Approx. 3 hours
(When using the AC adaptor included with the unit)
Battery life:
■ Cleaning
When the unit becomes dirty
Clean it with a soft cloth.
When the unit is excessively dirty, use a
soft cloth dampened in water.
(External surfaces only)
Clean the earphone plug and the con-
necting cable plug.
This will prevent noise.
Notes:
● Do not use chemicals for cleaning (pet-
rol, paint thinner, etc.)
It may affect the quality or colour.
● Do not apply oil to the inside of the unit.
It may cause malfunctions.
SPECIFICATIONS
When using the
rechargeable battery (fully
charged) included with
the unit
When using one, commercially
available, high capacity, "AA"
size, alkaline battery (in the
battery case)
When using one, commercially
available, high capacity, “AA”
size battery with the recharge-
able battery (fully charged)
Continuous recording:
Approx. 8 hours
Continuous recording:
Approx. 3 hours
Continuous recording:
Approx. 11 hours
Continuous play:
Approx. 10 hours
Continuous play:
Approx. 6 hours
Continuous play:
Approx. 16 hours
42
MD-MS722H(SUK)