139
ADJUSTING THE SHARPNESS OF AN
IMAGE (Sharpness)
This is used to sharpen an image or make it softer.
For an image adjustment example, see "Adjusting the sharpness of an image (Sharpness)" in the Quick Start Guide.
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Colour Adjustments.
(1) Touch the keys to switch through
the screens.
(2) Touch the [Colour Adjustments] key.
4
Touch the [Sharpness] key.
5
Adjust the image.
(1) Touch the [Soft] key or the [Sharp] key.
(2) Touch the [OK] key.
When the [OK] key is touched, you will return to the
special mode screen. Touch the [OK] key to return to the
base screen of the copy mode.
To Next Page
Loading...
