149
CHECKING COPIES BEFORE PRINTING
(Proof Copy)
This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked
for errors, the remaining sets can be printed. Normally it is necessary to re-scan the original each time changes to
settings are required. However, this feature makes it possible to change settings for the scanned original without
scanning it again, allowing you perform copying more efficiently.
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
2
Select copy settings.
3
Touch the [Special Modes] key.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
5 sets of copies are specified 1 set of copies is printed
If OK
The remaining 4 sets are printed
1 set is printed after the
settings are adjusted
The remaining 4 sets are printed
Adjust the
settings
If OK
To Next Page
Loading...
