Sharp MX-2314N - Automatic Document Feeder; Punch Module; Fax Specifications

11
Name
Reversing Single Pass Feeder (RSPF)
Document feeder types
Reversing Single Pass Feeder (RSPF)
Original paper sizes
A3 (11" × 17") to A5 (5-1/2" × 8-1/2")
Original paper types
Paper weight Thin paper 35 g/m
2
(9 lbs. bond) to 49 g/m
2
(13 lbs. bond)
Plain paper 50 g/m
2
(13 lbs. bond) to 128 g/m
2
(32 lbs. bond)
Two-sided 50 g/m
2
(13 lbs. bond) to 105 g/m
2
(28 lbs. bond)
Paper storage capacity
100 sheets (80 g/m
2
(21 lbs.)) (or maximum stack height of 13 mm
(33/64"))
Scan speed (copy)
B/W: 50 one-sided sheets/minute
(A4 (8-1/2" × 11") horizontal) (600 × 400 dpi)
Colour: 36 one-sided sheets/minute
(A4 (8-1/2" × 11") horizontal) (600 × 600 dpi)
Max. number of stapled sheets
(90g/m
2
(24lbs.))
Max. number of 50 sheets (A4 (8-1/2" × 11"), A4R (8-1/2" × 11"R), B5)
Max. number of 30 sheets (A3 (11" × 17"), B4 (8-1/2" × 14"))
Staple position
3 locations (front, rear or both)
Required power supply
Supplied from this machine
Weight
Approx. 12 kg (26 lbs.)
Dimensions
When output paper tray is stored
428 mm (W) × 593 mm (D) × 198mm (H)
(16-55/64" (W) × 23-22/64" (D) × 7-51/64" (H))
When output paper tray is extended
612 mm (W) × 593 mm (D) × 198 mm (H)
(24-6/64" (W) × 23-22/64" (D) × 7-51/64" (H))
Name
Punch module (MX-PN11A, MX-PN11B, MX-PN11C, MX-PN11D) for
finisher
Paper size for punch module
A3 (11" × 17") to B5R (7-1/4" × 10-1/2"R)
 Cannot punch special types of paper such as OHP.
Holes
MX-PN11A 2 holes
MX-PN11B 3 holes
MX-PN11C 4 holes
MX-PN11D 4 holes (wide)
Required power supply
Supplied from finisher
Weight
Approx. 3 kg (7 lbs.)
Dimensions
98 mm (W) × 477 mm (D) × 137 mm (H)
(3-55/64" (W) × 18-50/64" (D) × 5-26/64" (H))
Name
Facsimile expansion kit (MX-FX11)
Useable lines
General phone lines (PSTN), automated branch exchange (PBX)
Scanning line density
Normal characters: 8 dot/mm × 3.85 line/mm
Small characters: 8 dot/mm × 7.7 line/mm
Fine characters: 8 dot/mm × 15.4 line/mm
High-definition: 16 dot/mm × 15.4 line/mm
Connection speed
Super G3: 33.6 kbps, G3: 14.4 kbps
Coding method
MH, MR, MMR, JBIG
Connection mode
Super G3 / G3
Original paper sizes for transmission
A3 (11" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max. length of
1,000 mm* can be transmitted (one-sided and B/W only).)
* Internet fax (optional) is up to 800 mm (at 600 x 600 dpi).
Automatic document feeder
Punch module
Fax Specications
Name
(MX-DE12) (MX-DE13) (MX-DE14)
Paper sizes
A3 (11" × 17") to A5R (5-1/2" × 8-1/2"R)
Useable paper
60 g/m
2
(16 lbs. bond) to 209 g/m
2
(110 lbs. index)
Paper capacity
500 sheets 1,000 (500 × 2) 1,500 (500 × 3)
Dimensions
583 mm (W) × 577 mm (D) × 382 mm (H)
(22-61/64" (W) × 22-46/64" (D) × 15-1/64" (H))
Weight
MX-DE12: Approx. 21 kg (46 lbs.)
MX-DE13: Approx. 23 kg (51 lbs.)
MX-DE14: Approx. 28 kg (61 lbs.)
Name
Finisher (MX-FN17)
Paper sizes
Depends on feeder specifications
Useable paper
55 g/m
2
(13 lbs. bond) to 300 g/m
2
(110lbs. cover)
Number of trays
1 Tray
Tray capacity (80g/m
2
(21 lbs.))
Non-stapled A3 wide (12" × 18") / A3 (11" × 17") /
B4 (8-1/2" × 14"): 250 sheets
A4 (8-1/2" × 11") / A4R (8-1/2" × 11"R) /
B5 / B5R (7-1/4” × 10-1/2”R) / A5R (5-1/2” ×
8-1/2”R): 500 sheets
Staple function A3 (11" × 17") / B4 (8-1/2" × 14"): 30 units or 250
sheets
A4 (8-1/2" × 11") /A4R (8-1/2" × 11"R) /
B5: 30 units or 500 sheets
Drawer
Finisher