Sharp MX-3140 User Manual

C
B
MX-FN22
Saddle Stitch
Finisher 4K
(100-sheet staple)
MX-FN21
Finisher 4K
(100-sheet staple)
MX-PCB50
Plockmatic
Interface Kit
MX-ST10
High Capacity
Stacker
MX-RB15
Curl Correction
Unit
MX-RB12
Paper Pass
Unit
and and/or
and and or
B
Configuration B: High Capacity Stacking
This configuration requires the MX-RB12, MX-RB15 and one MX-ST10.
• An additional MX-ST10 can be added, but is not required.
• Each MX-ST10 includes one MX-CA10 Paper Cart.
• Additional paper carts can be ordered for convenience.
• The MX-SL10N Status Indicator can be added to
any configuration.
C
Configuration C: Basic 100-sheet Staple Finishing
This configuration requires the MX-RB12, MX-RB15 and the MX-FN21 or MX-FN22.
• The MX-FN21 cannot be used with the MX-FN22.
• The MX-BM50 requires the MX-FN21 and MX-PCB50.
• The MX-FD50 must be connected to the MX-TM50.
• The MX-SL10N Status Indicator can be added to any configuration.
MX-TM10
Trimming Unit
MX-PN13B
3-Hole
Punch Unit
MX-ST10
High Capacity
Stacker
(not required)
MX-CF11
2-Tray
Inserter Unit
MX-6500N/7500N +
MX-RB12 Paper Pass Unit +
MX-RB15 Curl Correction Unit
(both required for Configurations
B and C)
MX-SL10N
Status Indicator
(optional)
A
MX-6500N/7500N
MX-TU14
Center Exit Tray
A
Configuration A
The MX-TU14 must be installed if no finishing
options are selected. This item cannot be combined
with items from other finishing configurations.
MX-BM50
Booklet Maker
MX-CF50
Cover Feeder
Exit Tray Included
with MX-BM50
MX-TM50
Trimming Unit
Module
MX-XB50
Rail Unit (recommended)
MX-FD50
Square Spine
Module
and
and
and
and
Plockmatic Production Booklet Maker System
MX-6500N/7500N Configuration Chart
StEP 2: ChooSE finiShing Configuration
© 2013SharpElectronicsCorporation.Allrightsreserved.
29

Sharp MX-3140 Specifications

General

Print Technology	Laser
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Speed	31 ppm
Original Size	A3
Connectivity	USB, Ethernet
Category	Multifunction Printer