Sharp MX-3140 User Manual

D
MX-ST10
High Capacity
Stacker
MX-GBCX2
GBC SmartPunch
Pro
TM
MX-RB13
Relay Unit
D
Configuration D: Advanced 100-sheet Staple Finishing
This configuration requires the MX-RB12, MX-RB15 and the MX-FN21 or MX-FN22.
• The MX-CF11, both MX-ST10s, MX-GBCX2, MX-FD10, and Plockmatic Production Booklet Maker System are all optional.
• The MX-GBCX2 requires the MX-RB13 (The MX-RB13 is only required when using the MX-GBCX2).
• The MX-RB13 is required to connect a 100-sheet finisher and 2-Tray Inserter Unit directly.
• The MX-FN21 cannot be used with the MX-FN22.
• The MX-BM50 requires the MX-FN21 and MX-PCB50.
• The MX-FD50 must be connected to the MX-TM50.
• The MX-SL10N Status Indicator can be added to any configuration.
MX-ST10
High Capacity
Stacker
MX-CF11
2-Tray
Inserter Unit
and/orand
and
and/orand/or
MX-FD10
Multi-Folding
Unit
(continued)
MX-FN22
Saddle Stitch
Finisher 4K
(100-sheet staple)
MX-FN21
Finisher 4K
(100-sheet staple)
andand or
MX-TM10
Trimming Unit
MX-PN13B
3-Hole
Punch Unit
MX-6500N/7500N +
MX-RB12 Paper Pass Unit +
MX-RB15 Curl Correction Unit
(both required for Configuration D)
MX-RB15
Curl Correction
Unit
MX-RB12
Paper Pass
Unit
MX-SL10N
Status Indicator
(optional)
MX-PCB50
Plockmatic
Interface Kit
and
MX-BM50
Booklet Maker
MX-CF50
Cover Feeder
Exit Tray Included
with MX-BM50
MX-TM50
Trimming Unit
Module
MX-XB50
Rail Unit (recommended)
MX-FD50
Square Spine
Module
and
and
and
and
Plockmatic Production Booklet Maker System
Both Units Required
StEP 2: ChooSE finiShing Configuration (continued)
MX-6500N/7500N Configuration Chart
© 2013SharpElectronicsCorporation.Allrightsreserved.
30

Sharp MX-3140 Specifications

General

Print Technology	Laser
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Speed	31 ppm
Original Size	A3
Connectivity	USB, Ethernet
Category	Multifunction Printer