MX-C250 MX-C250/MX-C250E/MX-C250F/MX-C250FE/MX-C300E/MX-C300F/C300W/C300WE(MAIN UNIT) 2 – 4
6. Specifications setting
Use SIM26 to set to the specifications according to the customer's
request.
To customize one of the following items after destination setting,
change the set value of the item.
7. Key sheet replacement (Only for north America)
1) Prepare the following Key sheets depending on the installed
models.
Machine with FAX : HPNLC0082QSZZ KEY SHEET
Machine without FAX : HPNLC0082QSZ1 KEY SHEET 3IN1
2) Remove the protector paper for the Key sheet.
3) Peel off the release paper in 5 to 6 mm from the edge on the
rear side of the Key sheet.
4) Put the Key sheet by attaching the peeled part on the rear side
of the Key sheet to the Operation panel.
At this moment, fit the STOP key, FAX key (only for FAX model)
and COPY key with the Key sheet. (For the machine with FAX)
Or, fit the STOP key, SCANNER key and COPY key with the
Key sheet. (For the machine without FAX)
Note : Do not make the buttons overlapped by the Key sheet
when putting the key sheet. The Key sheet could be banked
by the buttons.
SIM No Content
26 6 Destination setting
SIM No Content
26 18 Toner save mode enable/disable setting
* For the other destinations, this setting is made by
the user program.
53 Auto color calibration enable/disable setting
1
1
‘13/Oct
To Next Page
Loading...
Need help?
General
