MX-C250 Necessary works before moving the machine 6 – 1
MX-C250
Service Manual
[6] Necessary works before moving the machine
1) If the following options are installed, remove all of them from
the machine.
- Paper pass unit
2) Remove the following consumable parts from the machine.
- Paper
- Toner cartridges
- Development cartridge
3) Lock the following sections.
- Scanner (Optical section)
- Paper cassette lift plate
Since the hard disk drive is built in the machine, use care not to
exert vibrations or shocks to the machine when in transit.
To Next Page
Loading...
Need help?
General
