Sharp MX-C428F

Menu item Description
Allow Background Removal
O
On*
Specify whether background removal is allowed.
Allow Custom Job scans
O
On*
Specify whether the Custom Job Scanning setting appears for
copy, scan, and fax.
Note: This menu item appears only when a hard disk or an
intelligent storage drive is installed.
One Page Flatbed Scanning
O*
On
Set the printer to scan any type of job involving the scanner
glass as a single page.
Note: The printer returns to the home screen after
performing a single flatbed scan instead of displaying
prompts.
Device Sounds
Mute All Sounds (O*)
Button Feedback (On*)
Volume (5*)
ADF Loaded Beep (On*)
Alarm Control (Single*)
Cartridge Alarm (Single*)
Speaker Mode (On until Connected*)
Ringer Volume (On*)
Configure the sound settings of the printer.
Screen Timeout
5–300 seconds (60*)
Set the idle time in seconds before the display shows the home
screen, or before the printer logs out a user account
automatically.
Note: An asterisk (*) next to a value indicates the factory default setting.
Eco-Mode
Menu item Description
Print
Sides
1‑Sided*
2‑Sided
Specify whether to print on one side or both sides of the paper.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 103