4 Load the paper.
• Load paper and card stock with the printable side facedown and the top edge entering the printer first.
• Load envelope with the flap side up and against the right side of the paper guide. Load European
envelopes with the flap entering the printer first.
Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated
linings, or self‑stick adhesives.
Note: To avoid paper pick problems, make sure that the leading edge of the paper or specialty media is
properly aligned with the separator dam.
Set up, install, and configure 47
To Next Page
Loading...
