EasyManua.ls Logo

Sharp MX-C428F

Sharp MX-C428F
321 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connecting the printer to a wireless network using WiFi Protected Setup
(WPS)
Before you begin, make sure that:
The access point (wireless router) is WPS
certified
or WPScompatible. For more information, see the
documentation that came with your access point.
A wireless module is installed in your printer. For more information, see the Installing wireless modules
section.
Active Adapter is set to Auto. From the home screen, touch Settings > Network/Ports > Network Overview
> Active Adapter.
Using the Push-Button method
1
From the home screen, touch Settings > Network/Ports > Wireless > WiFi Protected Setup > Start Push
Button Method.
2 Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the home screen, touch Settings > Network/Ports > Wireless > WiFi Protected Setup > Start PIN
Method.
2 Copy the eightdigit WPS PIN.
3 Open a web browser, and then type the IP address of your access point in the address
field.
Notes:
To know the IP address, see the documentation that came with your access point.
If you are using a proxy server, then temporarily disable it to load the web page correctly.
4 Access the WPS settings. For more information, see the documentation that came with your access point.
5 Enter the eightdigit PIN, and then save the changes.
Configuring
WiFi Direct
Wi-Fi Direct
®
allows wireless devices to connect directly to a Wi-Fi Directenabled printer without using an
access point (wireless router).
Before you begin, make sure that a wireless module is installed on your printer. For more information, see the
Installing wireless modules section.
1 From the home screen, touch Settings > Network/Ports > Wi-Fi Direct.
2 Configure the settings.
Enable WiFi Direct—Enables the printer to broadcast its own WiFi Direct network.
WiFi Direct Name—Assigns a name for the WiFi Direct network.
WiFi Direct Password—Assigns the password for negotiating the wireless security when using the
peerto-peer connection.
Set up, install, and configure 79

Table of Contents

Related product manuals