MX-M200D SIMULATIONS 7-25
26 56 Life correction ON/OFF setting
The image correction ON/OFF setting is made according to the usage level (life) of developer.
When this simulation is executed, the list of the modes and the current set value are displayed on the LCD.
Select an item to be changed with the arrow keys, and change the set value to the required value.
(1=ON [Enable], 0=OFF [Disable])
When [OK] key or [START] key is pressed, the setting is saved to the EEPROM.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
Default:
1: 0
2: 0
3: 0
4: 0
5: 0
6: 0
7: 0
8: 0
60 [FAX] key Enable/Disable setting
Used to set Enable/Disable of the [FAX] key when the FAX PWB is not installed.
Though this setting is set to Enable, if the FAX PWB is not installed, a message of "FAX PWB is not
installed" is displayed.
* When the FAX PWB is installed, the display shifts to the FAX window regardless of this setting.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
Default:
0
73 Toner save setting display/non-display
Used to set Enable/Disable of the toner save setting in the system settings. If this setting is set to Enable (1),
the toner save setting appears in the system settings to allow setting.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
Default:
0
74 Total counter display change setting
Used to set whether the scanner counter value is added to the total counter display in the system settings.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
Default:
0
Main
code
Sub
code
Contents Remark
Sim26-56 LIFE SET
1:AE1
2:AE2
3:TEXT
1/3 [ 0- 1]
1
1
1
1
Sim26-56 LIFE SET
4:PHOTO 1
5:PHOTO 2
6:AE(TS)1
2/3 [ 0- 1]
1
1
1
1
Sim26-56 LIFE SET
7:AE(TS)2
8:TEXT(TS)
3/3 [ 0- 1]
1
1
1
1
Screen display : adjustment mode
1: AE1
2: AE2
3: TEXT
4: PHOTO 1
: AE1 life correction
: AE2 life correction
: TEXT life correction
: PHOTO (Error diffusion) life correction
Screen display : Adjustment mode
5:PHOTO 2
6:AE(TS)1
7:AE(TS)2
8:TEXT
(TS)
: PHOTO(Dither) life correction
: TSAE1 life correction
: TSAE2 life correction
: TSTEXT life correction
Sim26-60 FAX KEY
1:FAX KEY MODE
[ 0- 1]
0
0
FAX PWB
Setting Yes No
0 (Enable) FAX window display FAX not-installed display
1 (Disable) FAX window display Error beep sound
Sim26-73 TS ENABLE
1:TS ENABLE
[ 0- 1]
0
0
Display: Setting
0 : Disable
1 : Enable
Sim26-74 ADD COUNT
1:ADD SCAN CNT
[ 0- 1]
0
0
0 : Scan counter not added
1 : Scan counter added
To Next Page
Loading...
Need help?
General
