7-31
SYSTEM SETTINGS
System Settings (Administrator) List
The system settings that appear following administrator login are shown below. The default setting for each item is also shown.
User Control
*1 This cannot be set on the machine. Set this in "User Control" in the Web pages.
*2 When the HID card reader is available.
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• For information on the general settings, see "System Settings (General) List" (page 7-6).
• For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX" (page 7-102).
Item Factory default setting Page
n User Control
7-47
l
User Authentication Setting 7-47
User Authentication Disabled 7-47
Authentication Method Setting Authenticate a User by Login Name
and Password
7-47
Device Account Mode Setting Disabled 7-47
l
Other Settings 7-48
Actions when the Limit of Pages for Output Jobs Job is Completed even when the Limit
of Pages is Reached
7-48
The Number of User Name Displayed Setting 12 7-48
A Warning when Login Fails Disabled 7-48
Disabling of Printing by Invalid User Disabled 7-48
Automatically print stored jobs after login Disabled 7-48
Default Network Authentication Server Setting – 7-48
Perform LDAP server access control. Disabled 7-49
Display Usage Status after Login – 7-50
User Information Print – 7-50
l
User List – 7-51
l
Page Limit Group List – 7-53
l
Authority Group List – 7-54
l
Favorite Operation Group List*
1
– 7-57
Favorite Operation Group Registration*
1
– 7-57
My Menu List*
1
– 7-58
l
User Count – 7-59
l
Card Area Settings – 7-60
l
Card Type/Reader Settings – 7-60
l
Card Setting*
2
– 7-60
Card Reader Device Registration – 7-60
To Next Page
Loading...
