Sharp MX-M266N Operation Guide

7-5
SYSTEM SETTINGS
Contents
This section describes the system settings that can be configured by general users of the machine.
Accessing the System Settings (General)
Make sure that the machine is in the standby state and
then press the [SYSTEM SETTINGS] key on the
operation panel.
When the [SYSTEM SETTINGS] key is pressed, the
following menu screen appears on the touch panel.
Touch the item in this screen that you wish to configure.
For detailed explanations of each of the settings, see the
following pages of this chapter.
SYSTEM SETTINGS (GENERAL)
System Settings
ExitAdmin Password
Total Count Default Settings
Address Control
USB-Device Check
List Print
(User)
Fax Data
Receive/Forward
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see "USER AUTHENTICATION" (page 1-16) in
"1. BEFORE USING THE MACHINE".

Sharp MX-M266N Specifications

General

Print Speed	26 ppm
Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Fax Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Maximum Paper Size	A3
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Paper Size	A4, A5, B5
Fax Transmission Speed	3 seconds per page
Operating System Compatibility	Windows, Mac, Linux
Paper Capacity	Standard: 500 sheets x 1 tray + 100-sheet bypass tray; Maximum: 2, 100 sheets