Sharp MX-M266N Operation Guide

7-99
SYSTEM SETTINGS
Contents
Data Backup
Settings and information stored in the machine can be saved to USB memory.
Storage Backup
Address book information and user information stored in
the machine can be saved to and retrieved from USB
memory.
Export
This exports data to USB memory.
Import
Use "Export" to import data written to USB memory back
into the machine.
Device Cloning
Device cloning is used to save the machine's setting
information in XML format and copy the information to
another machine.
This function saves you the trouble of repeatedly
configuring the same settings in multiple machines.
Export
This exports data to USB memory.
Import
Use "Export" to import data written to USB memory back
into the machine.
• This function can be enabled when a USB memory device is installed.
• This function cannot be used while the system settings are in use, while a job is being executed, or when there is a
reserved job.
• For machines for which data can be imported, contact your SHARP dealer or nearest SHARP service department.
The following data is not copied when device cloning
is performed:
• List print and fax forwarding items.
• Count and device status display items.
• IP address of the machine, device name,
administrator password, sender names for image
send, and other information that is specific to the
machine.
• Screen contrast, color adjustment, and other
adjusted values particular to each hardware device.

Sharp MX-M266N Specifications

General

Print Speed	26 ppm
Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Fax Speed	33.6 Kbps
Copy Resolution	600 x 600 dpi
Maximum Paper Size	A3
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Paper Size	A4, A5, B5
Fax Transmission Speed	3 seconds per page
Operating System Compatibility	Windows, Mac, Linux
Paper Capacity	Standard: 500 sheets x 1 tray + 100-sheet bypass tray; Maximum: 2, 100 sheets