EasyManua.ls Logo

Sharp MX-M266N

Sharp MX-M266N
794 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-57
PRINTER
Contents
DIRECTLY PRINTING A FILE IN USB MEMORY
This function requires the hard disk drive.
A file in a USB memory device connected to the machine can be printed from the operation panel of the machine without
using the printer driver. When the printer driver of the machine is not installed on your computer, you can copy a file into
a commercially available USB memory device and connect the device to the machine to print the file directly.
1
Connect the USB memory device to the
machine.
Use a FAT32 USB memory with a capacity of no more than 32 GB.
2
Access the USB memory device.
(1) Touch the [DOCUMENT FILING] key.
(2) Touch the [Ex Data Access] tab.
(3) Touch the [USB Memory] key.
System Settings(Administrator) : Disabling of USB Memory Direct Print
This setting is used to disable printing of files in a USB memory.
When this setting is enabled, [USB Memory] key cannot be touched.
FTP
Acesso a Dados Externos
Recup.arquivo
Ler p/ HDD HDD Status
Ac.aDados Ext.
ENVIAR
IMAGEM
ARQ.
DOCUMENTOS
COPIAR
Pasta de Rede
Memória USB
(1) (2) (3)

Table of Contents

Other manuals for Sharp MX-M266N

Related product manuals