What to do if my Sharp Printer has insufficient computer memory?
If your Sharp Printer isn't printing due to insufficient computer memory or hard disk space, delete unnecessary files to increase the free space of the hard disk. Also, close unnecessary applications to increase memory available for printing.
Why is my Sharp Printer not stapling?
If your Sharp Printer isn't stapling, it could be due to a few reasons. First, ensure that the print job includes page sizes that can be stapled. Also, check that stapling is enabled in the system settings (administrator).
How to fix a Sharp Printer that is not printing due to a paper misfeed?
If your Sharp Printer isn't printing due to an error like a paper misfeed, a message will appear on the touch panel. Follow the instructions in the message to clear the error. Printing will automatically resume once the error is resolved.
How to check USB connection for Sharp MX-M310 All in One Printer software installation?
To check your computer's USB connection, use the Device Manager in Windows. Look for "Universal Serial Bus controllers." If your controller chipset type and root hub appear, USB should be usable. If a yellow exclamation point is present or the items are absent, consult your computer manual or manufacturer to enable USB. Then, reinstall the printer driver.
What to do if the software cannot be installed on my Sharp MX-M310?
If the software installation fails, ensure your computer has enough free hard drive space by deleting unnecessary files and applications. Also, verify that the software is compatible with your operating system. Click the [Display Readme] button in the installer for detailed information on installation requirements for Windows.
Why does my Sharp Printer not print if the LAN cable is disconnected?
If the LAN cable is disconnected, your Sharp Printer may not print. Ensure that the LAN cable is firmly inserted in the connectors on both the printer and the computer.
What to do if my Sharp Printer is not printing?
If your Sharp Printer isn't printing, there are several potential causes. First, ensure the interface cable is securely connected and restart your computer. Check that the LAN cable is firmly inserted into both the printer and the computer. Also, verify that the printer is configured for the same network as the computer and is online, indicated by the lit 'ON LINE' indicator. Insufficient computer memory or hard disk space can also cause printing issues; delete unnecessary files or close applications. Finally, ensure that the printer driver is installed correctly. If an error message appears on the touch panel, follow the instructions to clear the error.
What to do if Sharp All in One Printer shows wrong paper size in bypass tray?
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed | 31 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 31 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Display | LCD |
| Type | All in One Printer |
| Paper Size | A4, A5, B5, Letter, Legal |
| Duplex Printing | Yes |
| Connectivity | USB, Ethernet |
To Next Page
