Sharp MX-M356N - Page 93

MX-M316N SIMULATION 6 – 14
8-6
Purpose
Operation test/check/adjustment
Function (Purpose)
Used to check the output of the transfer
charger output current.
Section
Process (Transfer)
Operation/Procedure
1) Select a target item to be adjusted with scroll keys.
2) Enter the set value with 10-key.
3) Press [EXECUTE] key.
The set value is saved and the electric current corresponding
to the set value is output for 30 sec.
When [EXECUTE] key is pressed, the output is terminated.
Item/Display Content
Setting
range
Default value
26cpm 31cpm 35cpm
A TC PLAIN SPX W Primary transfer bias reference
value
Plain
paper
Front surface 5 - 35 18
18 20
B TC PLAIN DPX W Back surface 5 - 35 16
16 16
C TC PLAIN SPX N1 Front surface 5 - 35 22
22 24
D TC PLAIN DPX N1 Back surface 5 - 35 20
20 22
E TC PLAIN SPX N2 Front surface 5 - 35 26
26 28
F TC PLAIN DPX N2 Back surface 5 - 35 24
24 26
G TC HEAVY1 W Heavy paper 5 - 35 14
14 16
H TC HEAVY1 N1 5 - 35 18
18 20
I TC HEAVY1 N2 5 - 35 22
22 24
J TC OHP W OHP 5 - 35 10
10 10
K TC OHP N1 5 - 35 14
14 14
L TC OHP N2 5 - 35 14
14 14
M TC ENVELOPE W Envelope 5 - 35 14
14 16
N TC ENVELOPE N1 5 - 35 18
18 20
O TC ENVELOPE N2 5 - 35 22
22 24
P TC THIN W Thin paper 5 - 35 14
14 16
Q TC THIN N1 5 - 35 18
18 20
R TC THIN N2 5 - 35 22
22 24
S TC LABEL W Label paper 5 - 35 14
14 16
T TC LABEL N1 5 - 35 18
18 20
U TC LABEL N2 5 - 35 22
22 24
V TC TAB W Primary transfer bias reference
value
Tab paper 5 - 35 14
14 16
W TC TAB N1 5 - 35 18
18 20
X TC TAB N2 5 - 35 22
22 24
Y TC POSTCARD N2 Post card 5 - 35 22
22 24
Z TC ADSORPTION W 0 - 100 50
50 50
AA TC ADSORPTION N1 0 - 100 50
50 50
AB TC ADSORPTION N2 0 - 100 50
50 50
AC TC INTERVAL BIAS W 0 - 100 50
50 50
AD TC INTERVAL BIAS N1 0 - 100 50
50 50
AE TC INTERVAL BIAS N2 0 - 100 50
50 50
AF TC FRONTEDGE 0 - 100 60
60 60
AG TC BACKEND SPX 0 - 100 90
90 90
AH TC BACKEND DPX 0 - 100 80
80 80
1
: ‘15/Aug.
1