Sharp MX-M363N User Manual

2-18
COPIER
Contents
AUTOMATIC 2-SIDED COPYING USING THE
DOCUMENT GLASS
Automatic 2-sided copying of 1-sided
originals
1
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
• After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
2
Touch the [2-Sided Copy] key.
Originals
Copies
Original size
detector
8-1/2" x 11"R (A4R)
B5R
8-1/2" x 14" (B4)
11" x 17" (A3)
8-1/2" x 11" (A4)
5-1/2" x 8-1/2"
(A5)
B5
mark
Document glass scale
Document glass scale
mark
11x17
8½x11
8½x11R
Auto
8½x11
Plain
8½x14
8½x11
8½x11
Special Modes
Plain
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
3.
2.
1.
Original
Paper Select
Auto
Exposure
Auto
4.
Preview

Sharp MX-M363N Specifications

General

Resolution	1200 x 1200 dpi
Hard Disk Drive	80 GB
Warm-Up Time	20 seconds
Scanner Type	Color Scanner
Scanner Resolution	600 x 600 dpi
Fax Modem Speed	33.6 Kbps
Print Speed	36 ppm
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Paper Size	Max A3
Connectivity	USB, Ethernet
Type	Digital