21
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
USING THE STANDARD WINDOWS PS PRINTER
DRIVER (Windows 98/Me/NT 4.0)
If the PS3 expansion kit is installed on the machine and you wish to use the standard Windows 98/Me/NT 4.0 PS printer
driver, follow the steps below to install the PPD driver using the Add Printer Wizard.
1
Download the software and save the
extracted files in any folder.
2
Click the [Start] button, select
[Settings] and then click [Printers].
3
Double-click the [Add printer] icon.
The "Add Printer Wizard" will appear.
4
Follow the on-screen instructions.
When you are asked to specify the path of the PPD file,
enter the path as follows.
After installation, see "CONFIGURING THE PRINTER
DRIVER FOR THE OPTIONS INSTALLED ON THE
MACHINE" (page 22) to configure the printer driver settings.
* "EnglishA" in North America. "English" in Europe.
X Installing the resident font information (Windows 98/Me)
If you have installed the PPD driver on Windows 98/Me and will be using the resident fonts in the machine, you must
install the resident font information. Follow the procedure below to install the resident font information.
1
Double-click the folder where the
extracted files are saved when you
installed the PPD driver.
2
Double-click the [EnglishA] folder (the
[English] folder in areas other than the
U.S.), the [PPD] folder, the [9XME]
folder, and then [PFMSetup.exe].
3
Follow the on-screen instructions.
After the resident font information has been installed,
restart your computer.
• The CD-ROM does not include software for Windows 98/Me/NT 4.0.
Contact your dealer or nearest authorized service representative if you want software for Windows 98/Me/NT 4.0.
• If you are using Windows 2000/XP/Server 2003/Vista/Server 2008, you can install the PPD driver from the installer.
• Be sure to view the Readme file (Readme.txt) before installing the PPD driver. The Readme file will be in the [EnglishA]*
folder inside the folder that contains the extracted files after you get the software.
Operating system PPD file path
Windows 98/Me (Folder containing extracted
files)\EnglishA*\PPD\9XME
Windows NT 4.0 (Folder containing extracted
files)\EnglishA*\PPD\NT40
• Before installing the resident font information, be sure to install the PPD driver.
• In the event that a resident font cannot be selected in a software application, install the resident font information again.
!mxm503_us_ins.book 21 ページ ２００９年１月２２日 木曜日 午後２時２１分
To Next Page
Loading...
Need help?
General
