To Next PageTo Next Page
Need help?Do you have a question about the Sharp AL-1020 and is the answer not in the manual?
General| Printing Technology | Laser |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Warm-up Time | 30 seconds |
| Standard Paper Capacity | 250 sheets |
| Bypass Tray Capacity | 1 sheet |
| Copy Speed | 20 ppm |
| Maximum Copies | 99 |
| Paper Size | A4, B5, A5, Letter, Legal |
| Zoom Range | 50% to 200% |
This model is a digital personal copier offering comfort, clarity, and ease of use.
Specifies monthly average copy and print volumes for target users.
Highlights copier capabilities like speed, quality, functions, and printer feature.
Specifies temperature and humidity requirements for optimal operation and storage.
Details physical dimensions and weight for different models.
Covers paper feed system, power source, and installed memory.
Provides detailed copy speeds, void area, and image loss specifications.
Lists printer speed, first print time, and OS compatibility for GDI printing.
Explains SOPM function and 2nd cassette door behavior.
Illustrates external parts and their locations on the copier.
Shows the layout and identification of internal parts.
Details the function of each button and indicator on the control panel.
Identifies and describes the function of key motors and solenoids.
Lists sensors and switches and their respective functions and outputs.
Identifies the main Printed Wiring Boards (PWBs) and their functions.
Explains the internal paper path and component operations.
Advises on proper placement and environmental considerations for installation.
Lists items to verify are included after unpacking.
Step-by-step guide for unpacking and installing the TD cartridge.
Instructions for loading paper and connecting power to the copier.
General description of the Single Path Feeder (SPF) unit.
Diagram of the SPF document handling path and its components.
Step-by-step operational flow of the SPF unit.
Detailed steps for disassembling and reassembling the SPF unit.
Steps for disassembling the optional 2nd cassette unit.
Lists available simulation codes and their respective displays.
Procedures for setting SPF and second cassette configurations.
Settings for side void amount and SPF document rear edge detection.
Adjustments for lead edge position and center offset.
Procedures for adjusting resist amount and performing self-print tests.
Lists functions that can be customized by the user.
Procedure for modifying user program settings.
Settings for exposure levels and toner save mode.
High-level schematic of the copier's electrical system.
Detailed block diagram of the Main Printed Wiring Board (PWB).
Explains CPU, ASIC signals, and input signals for electrical operation.
Details the control circuit for the mirror motor.
