What to do if my Sharp AL-800 Copier is producing blank copies?
If your Sharp Copier is producing blank copies, the most likely cause is that the original document is not placed correctly. Make sure you place the original face down on the original table.
How to remove smudges from Sharp AL-800 Copier copies?
If you notice dust, dirt, or smudges on your Sharp Copier copies, the original table or original cover may be dirty. Clean them regularly.
How to troubleshoot a Sharp AL-800 that does not turn on?
First, ensure the Sharp Copier is plugged into a grounded outlet. Then, check that the power switch is turned on. Finally, make sure the front cover is gently closed.
Why does my Sharp AL-800 keep misfeeding paper?
Frequent paper misfeeds in your Sharp Copier can occur for several reasons. Here's what to check: * Ensure you are using standard paper. If using special papers, feed one sheet at a time. * Make sure the paper isn't curled or damp; store it flat in its wrapper in a dry location. * Remove any pieces of misfed paper from inside the copier. * Verify the paper guide in the paper tray is set properly for the paper size. * Don't overload the paper tray; remove excessive paper. * Confirm that the TD cartridge and drum cartridge are installed correctly.
Why do images rub off easily from copies made with my Sharp Copier?
Images rubbing off easily from copies made with your Sharp Copier can be due to a couple of reasons. The copy paper might be too heavy; use copy paper within the specified range. Also, the paper might be damp; replace it with dry copy paper and store unused paper in its wrapper in a dry location.
Why are the graphics faded on my Sharp AL-800 copies?
Faded graphics on your Sharp Copier copies can occur if the toner is unevenly distributed. To resolve this, remove the TD cartridge and gently shake it horizontally to evenly distribute the toner. Also, the toner might be low, indicating that the TD cartridge needs to be replaced soon. Obtain a new TD cartridge.
What causes missing parts of images on Sharp AL-800 Copier copies?
If parts of images are missing on your Sharp Copier copies, it could be due to a dirty drum cartridge. Clean the drum cartridge.
How do I turn off power save mode on my Sharp AL-800?
If the power save indicator is on, your Sharp Copier might be in preheat mode. Press any key to cancel the preheat mode. Alternatively, it could be in auto power shut-off mode; press the print key to cancel this mode.
What causes black staining on copies from my Sharp AL-800?
Black staining on copies from your Sharp Copier can be caused by a paper quality problem; use only paper that meets the specifications required by the copier. It can also occur if a TD cartridge from another SHARP copier has been installed; always use the same TD cartridge with the same copier.
Why is half of the page blank when copying on my Sharp AL-800 Copier?
A blank half-page issue on your Sharp Copier can stem from various factors: * The page layout might be too complex; simplify it to reduce required memory. * The resolution could be set to 600 dpi; set it to 300 dpi. * The page orientation setting may be incorrect; change it with the printer driver. * Too many applications might be open; close unnecessary ones before printing. * The paper in the tray may be larger than the size specified; load the correct paper. * Interface cable specifications may be incorrect; use the cable included with the AL-840. * The CPU specifications may be incorrect; check that your computer's CPU is 486DX 66 MHz or better. * The computer might have insufficient RAM; install more RAM.
Provides basic information for using the copier.
Lists important safety precautions to follow when using the copier.
Details copier speed, warm-up time, and first-copy time.
Explains copying quality, resolution, and photo mode.
Covers zoom, continuous copying, toner save mode, and user programs.
Describes the memory buffer feature for efficient copying.
Notes the AL-840's dual function as a laser printer.
Highlights the paper tray capacity for office use.
Mentions space-saving and power-saving features.
Explains how to select exposure modes like AUTO, MANUAL, or PHOTO.
Details adjusting manual/photo exposure and user program settings.
Describes indicator lights for drum, TD cartridge replacement, and misfeeds.
Explains selecting reduction/enlargement ratios.
Page number for zoom indicator.
Page number for copy ratio display key.
Describes what the display shows: quantity, zoom, codes, errors.
Explains the ON LINE indicator for printer use.
Explains the power save indicator.
Details using zoom keys for reduction/enlargement.
Explains using keys for copy quantity and user programs.
Describes the function of the clear key.
Explains the print key and ready indicator.
Provides guidelines for proper copier installation and placement.
Details precautions for handling the copier and its components.
Lists items to check for in the copier package.
Provides instructions on how to unpack the copier.
Step-by-step guide to remove protective materials from the copier.
Detailed instructions for installing the TD cartridge.
Instructions for loading copy paper into the paper tray.
Steps for connecting the copier to a power source.
Guide for connecting the interface cable for printer functionality.
Steps to turn on the copier and initial indicator status.
Describes the default settings displayed after power on.
Details recommended paper types, sizes, and weights for the copier.
Step-by-step guide for performing standard copying operations.
How to copy bulky objects by lifting the original cover.
Adjusting copy density manually or for photographs.
Selecting preset ratios or using zoom for custom copy sizes.
Instructions for making copies on both sides of the paper.
Overview of special functions like toner save and power save modes.
Explains preheat and auto power shut-off modes for energy saving.
Describes the auto clear function and its time setting.
Reduces toner consumption by approximately 10%.
Allows setting, changing, or canceling parameters for functions.
Step-by-step guide to replace the TD cartridge when toner is low.
Instructions for replacing the drum cartridge after approximately 20,000 copies.
General advice for proper care and regular cleaning of the copier.
How to clean the glass of the original table and the original cover.
Detailed procedure for cleaning the drum surface carefully.
Instructions for storing the copier to prevent dust and foreign matter.
Guides on how to remove paper jams from different locations in the copier.
Specific steps for clearing a misfeed from the paper tray.
Specific steps for clearing a misfeed located within the copier's internal parts.
Specific steps for clearing a misfeed from the paper exit area.
A guide to identify and resolve common copier problems by cause and solution.
Explains the meaning of various indicators and alphanumeric codes on the operation panel.
Procedure to display the total number of copies made by the copier.
Lists technical specifications of the copier, including dimensions, power, and performance.
Provides part numbers for supplies and guidance on proper storage.
To Next Page
General
