Sharp AL-800 - INSTALLING THE TD CARTRIDGE

12
2
Installation
REMOVING PROTECTIVE PACKING MATERIALS
5
After removing protecting material , gently pull black protective paper and
protective material together and remove them. Be careful not to tear the protective
paper during removal.
d
c
e
INSTALLING THE TD CARTRIDGE
Be sure to remove the protective paper from the drum cartridge before installing
the TD cartridge.
1
Remove the TD cartridge from the bag. Hold the cartridge on both sides and shake it
horizontally four or five times.
4 or 5 times
2
Remove the protective tape and then the protective cover.