What to do if dust and smudges appear on copies from Sharp All in One Printer?
If you notice dust, dirt, or smudges appearing on copies from your Sharp All in One Printer, the original table or original cover might be dirty; clean them regularly. Also, the original document might be smudged or blotchy, so use a clean original.
How to fix striped copies from my Sharp All in One Printer?
If your Sharp All in One Printer is producing striped copies, the transfer charger may need cleaning. Clean the transfer charger.
Why does my Sharp All in One Printer paper misfeed frequently?
Frequent paper misfeeds in your Sharp All in One Printer can occur if you're using non-standard paper. Try using standard paper, or if you need to use special papers, feed them through the single bypass/multi-bypass tray. Also, paper that is curled or damp can cause misfeeds. Store paper flat in its wrapper in a dry location. Make sure to remove any pieces of paper inside the unit. Ensure the paper guides in the paper tray are set properly for the paper size you're using. Finally, remove excessive paper from the tray, as overloading it can lead to misfeeds.
How to fix a Sharp All in One Printer that does not operate?
If your Sharp All in One Printer isn't operating, first ensure it's plugged into a grounded outlet. Next, check that the power switch is turned on. Also, make sure the side cover is closed securely. If it still doesn't work, gently close the front cover and then close the side cover.
Why are the copies from my Sharp All in One Printer too dark or too light?
If copies from your Sharp All in One Printer are too dark or too light, and the original image itself is too dark or too light, adjust the exposure manually. If the unit is in automatic exposure mode, adjust the automatic exposure level. If the unit is in photo exposure mode, cancel the photo exposure mode.
Why do images rub off easily from Sharp All in One Printer copies?
If images rub off the copy easily when using your Sharp All in One Printer, the paper might be too heavy; use paper within the specified range. Alternatively, the paper might be damp; replace it with dry paper. If the unit is not used for a long time, remove the paper from the paper tray and store it in its wrapper in a dry location.
Why does my Sharp All in One Printer produce blank copies?
If you're getting blank copies from your Sharp All in One Printer, make sure the original is placed face down on the original table or face up in the SPF/RSPF.
Explains caution labels and safe usage guidelines for the unit.
Guidelines for choosing an appropriate installation location for the unit.
Precautions for safe handling of the unit and its components.
Information on using printed and online manuals for the unit.
Explains conventions, icons, and abbreviations used in the manuals.
Identifies and illustrates the various parts of the copier unit.
Details the functions of control keys, indicators, and the display on the unit's operation panel.
Step-by-step guide for the initial setup and installation of the unit.
Instructions for checking package contents and preparing the unit for setup.
Procedure to release the scan head locking switch for operation.
Steps and precautions for turning the unit on.
Describes the default settings of the operation panel after power-on.
Information on how to turn off the unit and auto power shut-off.
Details paper types, sizes, and loading procedures for trays and bypass.
Instructions for loading paper, film, and envelopes using the bypass feed.
Introduces software components, system requirements, and pre-installation checks.
Guides for installing software on Windows XP, 98/Me/2000, and 95/NT4.0.
Instructions for using the unit's printer and scanner functions via installed software.
Describes the basic steps for copying, including placing originals.
How to set copy quantity, adjust density, and use zoom/reduction features.
Instructions for performing two-sided copying using originals or RSPF.
How to use toner save, preheat, and auto power shut-off modes.
How to set, change, or cancel user-configurable parameters like auto clear time.
Step-by-step guide for replacing the TD and drum cartridges.
Procedures for cleaning the unit's exterior and internal components.
Steps to clean the transfer charger to resolve copy quality issues.
A table listing common problems, causes, solutions, and page references.
Explains the meaning of operational indicators and alphanumeric codes on the panel.
Detailed instructions for removing paper misfeeds from various locations.
Technical specifications for various SHARP copier models.
Information on ordering genuine SHARP supplies and optional accessories.
Guidelines for safely moving and storing the copier unit.
Details about the product, company, hazards, first aid, handling, and disposal.
General| Copy Resolution | 600 x 600 dpi |
|---|---|
| First Copy Time | 10 seconds |
| Original Size | A4 |
| Paper Capacity | 250 sheets |
| Print/Copy Speed | 12 ppm |
| Paper Size | A4, A5, B5, Legal, Letter |
| Multiple Copy | 1 to 99 copies |
| Copy Magnification | 50-200% |
To Next Page
