Sharp AL-1215

52
This chapter describes the special functions of this unit. Use these functions as
needed.
ABOUT THE SPECIAL FUNCTIONS OF
AL-1551CS
Two sided copying
When copying from the RSPF, two-side originals can be copied automatically
without having to manually turn them over. Automatic two-sided copying can also be
performed without using the RSPF. When copying from one-sided originals to two-
sided copies, copying orientation can be selected between Turn on Long Edge and
Turn on Short Edge.
Making two-sided copies
1
Place the original(s) on the original table or in the RSPF. (see
"ORIGINAL PLACEMENT" (p.47).
2
Select two-sided copy mode.
• When making two-sided copies from the original table, the paper size
must be letter. When making two-sided copies from the RSPF, letter,
legal, and invoice sizes can be used. Non-standard size paper cannot
be used.
• When making two-sided copies, the multi-bypass tray cannot be used.
• When using two-sided invoice size originals from the RSPF, be sure
to place them in the landscape orientation. Otherwise, an original
misfeed will occur.
A
A
A A
A
A
A A
Turn on Short EdgeTurn on Long Edge
6
SPECIAL FUNCTIONS
AL-1215_1530-1551CS.book 52 ページ ２００２年８月７日 水曜日 午前９時３４分