9
2
2
Remove all pieces of tape shown in the illustration below. Then
open the original cover/SPF/RSPF and remove protective
materials. After that, take out the bag containing the power
cord and TD cartridge.
3
Release the scan head locking switch.
The scan head locking switch is under the original table.
If the switch is locked (
)
, the unit will not operate. Unlock the switch ( )
as shown below.
AL-1551CS
AL-1540CS
(AL-1551CS only)
AL-1215/AL-1530CS
AL-1215/AL-1530CS
AL-1540CS/AL-1551CS
AL-1540CS/AL-1551CS
Lock Unlock
Grasp here and turn in
the direction of the arrow.
AL-1215_1530-1551CS.book 9 ページ ２００２年８月７日 水曜日 午前９時３４分
To Next Page
Loading...
Need help?
General
