29
5
Supplies and user maintenance
4
Grasp the handle of the cartridge and pull the cartridge clear of the copier. Dispose of
the old TD cartridge in accordance with local regulations.
5
Install a new TD cartridge. To install the new cartridge, see page 12, INSTALLING
THE TD CARTRIDGE.
6
Close the front cover and turn on the copier power. The indicator will go out and the
ready ( ) indicator will light up.
DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 20,000 copies. When the internal counter
reaches approximately 19,000 copies, the drum replacement required ( ) indicator will light
up indicating that replacement of the drum cartridge will be needed soon. For information on
purchasing drum cartridges, see SUPPLY PART NUMBERS AND STORAGE on page 44.
When the indicator begins to blink, the copier will stop operating until the cartridge is replaced.
Replace the drum cartridge at this time.
1
Place some scrap paper on a nearby level surface.
2
Turn off the copier power.
3
Push gently on both sides of the front cover to open the cover.
TD CARTRIDGE REPLACEMENT
To Next Page
Loading...
Need help?
General
