Sharp MX-M550N

MX-M700N MANUAL PAPER FEED SECTION E – 4
(3) Pickup roller
(4) Paper feed roller
(5) Separation roller
1) Pull out the multi manual paper feed tray unit.
(See "A. Multi manual paper feed tray unit")
2) Remove the actuator unit.
(See "A-(2) Manual empty detector")
3) Unhook the claw to remove the pickup roller.
4) Unhook the claw to remove the paper feed roller.
5) Remove the separation roller cover.
6) Remove the separation roller.
(6) Torque limiter
1) Pull out the multi paper feed tray unit.
(See "A. Multi manual paper feed tray unit")
2) Remove the bottom cover.
3) Remove the separation roller.
4) Remove the separation roller shaft, and remove the torque lim-
iter.