MX-M700N TRAY PAPER FEED SECTION F – 15
h. transport roller 8, 10
1) Remove the paper feed tray 3, 4.
(See “(1)Paper feed unit (Paper feed tray 3, 4)”)
2) Remove the cover. (See “e. Paper pickup solenoid”)
3) Remove the E-ring and remove the pulley bearing.
4) Remove the transport roller 8, 10.
i. Transport roller 5, 7
1) Remove the paper feed tray 3, 4.
(See “(1)Paper feed unit (Paper feed tray 3, 4)”)
2) Remove the cover. (See “e. Paper pickup solenoid”)
3) Remove the E-ring and remove the pulley bearing.
4) Remove the transport roller 5, 7.
j. Paper pass detector
1) Remove the paper feed tray 3, 4.
(See “(1)Paper feed unit (Paper feed tray 3, 4)”)
2) Remove the cover. (See “e. Paper pickup solenoid”)
3) Remove the paper pass detector unit.
4) Remove the paper pass detector.
(2) Others
a. Paper size detection PWB
1) Remove the paper feed tray.
(See “(1) Paper feed unit (Paper feed tray 3, 4)”)
2) Disconnect the connector, and remove the paper size detec-
tion PWB unit.
3) Release the pawl, and remove the paper size detection PWB.
To Next Page
Loading...
